RFID Tags & Implanters

Bulk Tags

BIO23.B 23mm X 3.85mm, 134.2kHz ISO, 0.618g *replaces the TX1420SST

TX1411SST 12.50mm X 2.07mm, 134.2kHz ISO, 0.1020g *replaces the TX1400ST, TX1400SST, and TX1411ST

TXP148511B 8.5mm X 2.12mm, 134.2kHz ISO, 0.067g

TX1411SSL 12.50mm X 2.07mm, 125 kHz, 0.1020g *replaces the TX1400SSL, TX1400L and TX1411L

Above tags require MK7 implanter or MK10 with applicable needle.

Preloaded Tags (Individual - Non Sterile)

NEW!! BIO12.APL
12.50mm X 2.07mm, 125 kHz, 0.1020g - This product is the 125 kHz tag preloaded in a single use needle. The tags are secured inside the needle, no worrying about tags falling out before implanting.

NEW!! BIO12.BPL
12.50mm X 2.07mm, 134.2kHz ISO, 0.1020g - This product is the 134.2 kHz tag preloaded in a single use needle. The tags are secured inside the needle, no worrying about tags falling out before implanting.

Above tags require MK20 or MK25 implanters.

Preloaded Tags (Tray - Non Sterile)

NEW!! BIO12.BPLT
12.50mm X 2.07mm, 134.2kHz ISO, 0.1020g - This product is the 134.2 kHz tag preloaded in a single use needle and packaged in a tray of (100). Primarily designed for, but not limited to the use in mass tagging.

NEW!! BIO12.APLT
12.50mm X 2.07mm, 125 kHz ISO, 0.1020g - This product is the 125 kHz tag preloaded in a single use needle and packaged in a tray of (100). Primarily designed for, but not limited to the use in mass tagging.

Above tags require MK20 or MK25 implanters

Preloaded Tags (Sterile)

NEW!! BIO12.BPLS
12.50mm X 2.07mm, 134.2kHz ISO, 0.1020g - This gas sterilized product is the 134.2 kHz tag preloaded in a single use needle. *replaces the TX1440ST

NEW!! BIO12.APLS
12.50mm X 2.07mm, 125 kHz, 0.1020g - This gas sterilized product is the 125 kHz tag preloaded in a single use needle. *replaces the TX1440L and the TX1406L

Above tags require MK20 or MK25 implanters

Implanters

NEW!! MK-20 Rapid Implant Gun
Works in conjunction with the pre-loaded needle system (BIO12.0). The MK-20 is the basic model.

NEW!! MK-25 Rapid Implant Gun
Works in conjunction with the pre-loaded needle system (BIO12.0) with quick eject trigger to remove the used needle quickly and safely.

MK7 Implanter
Plastic syringe-style implanter with 1.25" non replaceable needle; For use with 8mm and 12mm tags.

MK10 Implanter
Syringe-style implanter with 2" replaceable needle; For use with 8mm, 12mm, or 23mm tags.

Replacement Needles

N206
2", 6 gauge replacement needle for MK10; For use with 23 mm tags.

N208
2", 8 gauge replacement needle for MK10; For use with TX1420SST tags *replaced by the BIO23.B tag.

N125
1.25" long, 12 gauge replacement needle for MK10 implanters; For use with 8 mm and 12 mm tags.